|
If
this is the first time you have ordered from us - Please review the
ordering instructions in our “How
to Order” Section. |
|
|
1. |
Enter
your Contact information on the Order Form – your name, address,
telephone and fax or email are required. |
2. |
Today’s
Date (Date Ordered). |
3. |
Preferred
Delivery Date (Note: in stock colours require 3-4 weeks production
time, non-stock items may take longer (please call for confirmation
date). |
4. |
Enter
all necessary measurements and notes. |
|
|
|
Print
and Fax or Email the completed Order Form to:
Fax: (416) 766-0448
Email: order@triplast.ca
Please call to confirm receipt of your order. |
|
|
|
Payment
terms: |
|
- Payment
in full required for orders less than $500. |
|
- Deposit
of 50% required for orders greater than $500. |
|
-
Final payment required upon pickup of order. |
|
- Orders
by email must provide Credit Card (Visa or Mastercard) number.
|
|
- Property
Managers, please contact us to obtain an Account Number. |
|
|
|
Additional
Notes and Suggestions: |
|
- If
the counter top is not “standard”, note all of the differences
on the Order Form |
|
-
Indicate length of tops in inches only, i.e., 87” not 7’3” |
|
90°
No drip edge front, rear post formed countertops standard measurements:
-
Kitchen countertop depth is 25”
- Vanity
countertop depth is 23”
-
Bar countertop depth is 27½”
-
Backsplashes are 4” high (measured from the top of the counter).
|
|
- Always Indicate depth of countertop: e.g., 25”
or 23”
|
|
- Do
not forget to indicate your choice of colour. |
|
- When
ordering more than one colour at the same time, do not place everything
on the same order form.
|
|
- Use
one Order Form for each colour. |
|
- When
ordering more than on type of top at the same time (i.e., vanity top
kitchen top), do not place everything on the same order form. Use
one Order Form for each
type. |
|
- On
L-shapes show the depth on both sides of the L-shape drawing. |
|
- Indicate
special sizes by circling or highlighting the measurement. |
|
- Finished
end caps are 1½”, unless otherwise mentioned. |
|
- If
rounded corners are required, indicate radius by the inch in a footnote
- i.e., 2” radius and draw in the curve. |
|
- For
boxes and special cut-outs, bring a template of the top. Out
of “Square” counters, also require a template. |
|
- Show
the length and width of the cut-outs. |
|
- We
suggest a counter top have a 1” overhang on each side when sitting
on a cabinet (remember this when ordering). |
|
|